Case Guards, Anyone?

[GAZL900]

OK Guys,
Here is the deal, alot of the members have contacted me about these Case Guards, I am thinking of making a few sets if I can get at least a quanty of 5, They are made from DOM 1" .120 wall tubing and will be ready for Painting or Plateing. (These have not been manufactured yet, I am trying to find out if there is enough interest before I build). Two to three weeks lead time, Payment required before I will manufacture.

Do to the extreme cost of materials now and the cost of Coating these, I offer them to you "AS IS" meaning You are responsible for Getting your set Coated or Plated.

These will be First come , First Served and I don't know when I might make another run.

Get them while you can, Price is $92.50 , this will include shipping to the Lower 48 States, Except for Calafornia, Arizona, (Add $7.50 if you live in one of these two states.

These will fit ZL900's and ZL1000's They require alot of patiance when installing because they fit like a glove, You might also have to buy a couple of bolts for fitment.

A few of the Guys aready have them on the bikes including ZLMark and others.
Thanks, Steve Paypal payment will go to SCahoe1@msn.com :headbang:

[paulfun]

I will take one for my zl1. Just let me know when you have enuff people and then I will send payment.

[GAZL900]

Alright, You were quick I just posted this.
Thanks, Steve

[87ZLSgtUSMC86]

definitely want a set here , ZL1000

[GAZL900]

OK, That is two sets, when we get to at least 5 I will request payment.
Thanks, Steve

[markus56]

Hi Steve!!! I snapped-up a set from your last run and since the quality of your guards are so good, I'll take a set of this new run as well. Mark

[GAZL900]

OK, We are up to Four sets now, I will make more than the run of 5 this time so if you want a set jump in.

Thanks, Steve

[Wstar425]

If I was a little closer to buying another ZL I would grab another one. I was one of the lucky 5 from the last time and I just want to say they are sweet! If you haven't seen the pics yet there are some powdercoated and installed pics in another thread in the parts section. You won't be sorry! Grab them while you can!

Installation is not that bad, two people would be better.

[RedRocket]

I will take set #5.

[GAZL900]

OK , that is set #5 that is one run, I will do two runs if we can get it to 10 sets.

So get them while you can.

THanks, Steve

[mick]

I will take a set.

[GAZL900]

OK, That is 6 sets now, if we can get at least 4 more, get your orders in.

Thanks, Steve

[toolmaker129]

I will take (1)

[GAZL900]

OK, That is 7 sets now, three more would be great.

For the seven that have already said they want a set, You can pay any time now,
Please make payment to Paypal account SCahoe1@msn.com

If you will be mailing a Postal Money Order please PM me and I will send you my address.

Also don't forget these have not been made and there will be at least a 2 week lead time.

Price is in the first post.

Thanks, Steve

[GAZL900]

Here is what we have so far:

Paulfun 1 set --------------------------Paying with Postal Money Order, I have Shipping Address
Markus56 1 set ------------------------ Paying with Postal Money Order, I have Shipping Address
87zlSgtusmc86 1 set ------------------ Paying with Postal Money Order, I Need Shipping Address
RedRocket 2 sets ---------------------Paid with Paypal I have address
Toolmaker129 1 set --------PLEASE PM ME AND LET ME KNOW HOW YOU WILL BE PAYING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Doublestar444 2 sets -------------------Paid and I have Shipping Address
CJ-ZL900 1 set -------------------------------Waiting on PM
If I have missed someone please let me know.

Please send your Paypal Payments Now to: SCahoe1@msn.com

And if you are sending a Postal Money Order, PM me for my address and also please include your shipping address.



Would love to get three more sets that would be two runs.

Thanks, Steve

[doublestar444]

Hi Steve,
Please put me down for two sets for my ZL900s.
I will pay pal you today.
regards,
Doublestar444
jim
THANKS!

[WillyD]

Do you have a pic of these?

Willy

[GAZL900]

Willy, I think when I did the last run, some of the guys posted pictures for everyone,
Does someone have a link to those pics?

Thanks, Steve

[zlMark]

http://www.zl-oa.com/forums/attachment.php?attachmentid=113&d=1209916862

[zlMark]

Steve, I have the guard I bought from you on the zl1000 and on the other zl I have the OEM accessory Kawasaki 2 pc. I like your design much better!

[zlMark]

http://www.zl-oa.com/forums/attachment.php?attachmentid=114&d=1209916862

[Phloid]

I would certainly be interested!! pix?

[Phloid]

oops ......I see it

[GAZL900]

Alright For everyone that has said they want a set or two , Please , I will need you to pay now, On page two you will see status of Who has paid and Who needs to pay and Who needs to contact me with there shipping address. I have a very busy schedule and have to allot time to manufacture these, so Please PM me with your shipping address and your payment.

Thanks Guys, Steve

[GAZL900]

OK, I am getting responses on how you are going to pay, but I can't associate who you are because I don't know what your memeber name is when you email only has your REAL Name.
So Please if you have sent me an email on how you are paying please include your Member name also.
Thanks, Steve

[RedRocket]

Steve,

Would it be possible for me to get 2 instead of 1? My buddy Gary (also a member) wants a set but doesn't have the internet at the moment. I can pay you for both of them today. Just let me know

[CJ-ZL900]

Steve - Please put me down for one (1) as well....I'll be paying via PayPal

Regards,
CJ

[GAZL900]

Here is what we have so far:

Paulfun 1 set --------------------------Paying with Postal Money Order, I have Shipping Address
Markus56 1 set ------------------------ I have received PMO, I have Shipping Address
87zlSgtusmc86 1 set ------------------ Paying with Postal Money Order, I Need Shipping Address
RedRocket 2 sets ---------------------Paid with Paypal I have address
Toolmaker129 1 set --------PLEASE PM ME AND LET ME KNOW HOW YOU WILL BE PAYING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Doublestar444 2 sets -------------------Paid and I have Shipping Address
CJ-ZL900 1 set -------------------------------Paid with Paypal , I have shipping address
If I have missed someone please let me know.

Please send your Paypal Payments Now to: SCahoe1@msn.com (SCahoe1@msn.com)

And if you are sending a Postal Money Order, PM me for my address and also please include your shipping address.



Would love to get at least 1 more set, that would be two runs.


If you would like a set Now is the time, there will not be another run after these.

Thanks, Steve
<!-- / message --><!-- edit note -->

[Don Fonzarelli]

If you can tell me how much shipping to NL would cost me, I might be very interested!

[Blagadán]

Mark,

Can you get your feet up on the case guards when you want to stretch your legs on a long ride, or are they too close?
My bro can set his feet on his engine guards almost like forward pegs and its really comfortable.

[furchin]

Blag, yes you can get your feet up to help with longer rides. I use some highway pegs on mine to add to the different foot positions. Makes a big difference on longer rides.

[lowlife]

They make foot extensions if you want Blag, bolt right on.

[zlMark]

Mark,

Can you get your feet up on the case guards when you want to stretch your legs on a long ride, or are they too close?
My bro can set his feet on his engine guards almost like forward pegs and its really comfortable.Yea you can get your feet up there but it's not a solid resting, I don't feel like my foot slipping off and hitting the tarmac at 70mph. I think wuputt even has pegs mounted to his frame. How about some zrx frame sliders that double as pegs?:thumbsup:

[Blagadán]

Yea you can get your feet up there but it's not a solid resting, I don't feel like my foot slipping off and hitting the tarmac at 70mph. I think wuputt even has pegs mounted to his frame. How about some zrx frame sliders that double as pegs?:thumbsup:

Wu, do you have a photo of the pegs mounted to your frame??

[GAZL900]

Alright , Here is where we stand. I have heard from everyone but Toolmaker about payment. Does anyone know him?
I will be working on these this weekend, we need to get at least two more to make it two complete runs, so If you need one or in the future will need one , Now is the time.
Yes I know its Easter Weekend, and that the Masters is being played, but I need to get started on these now.

Thanks < Steve

[MID.KNIGHT]

:pistols:DONT ANYONE SCREW THIS ONE UP:pistols:,LOL IM DOWN,THANKS

[GAZL900]

Here where it stands:

Paulfun 1 set --------------------------Paid with Postal Money Order, I have Shipping Address -------Shipped 4/17/09

Markus56 1 set ------------------------ I have received PMO, I have Shipping Address-----------SHIPPED 4/14/09

87zlSgtusmc86 1 set ------------------ Paying with Postal Money Order, I Need Shipping Address

RedRocket 2 sets ---------------------- PAID ---------------------------------------------------SHIPPED 4/14/09

Toolmaker129 1 set --------PLEASE PM ME AND LET ME KNOW HOW YOU WILL BE PAYING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Doublestar444 2 sets -------------------Paid and I have Shipping Address---------------------SHIPPED 4/14/09

CJ-ZL900 1 set -------------------------------Paid with Paypal , I have shipping address

MID.KNIGHT 1set _________________________Paid and I have Shipping Address----------------SHIPPED 4/14/09
If I have missed someone please let me know.

Please send your Paypal Payments Now to: SCahoe1@msn.com (SCahoe1@msn.com)

And if you are sending a Postal Money Order, PM me for my address and also please include your shipping address.



Would love to get at least 2 more set, that would be two runs.


If you would like a set Now is the time, there will not be another run after these.

Thanks, Steve
<!-- / message --><!-- edit note -->
<!-- / message --><!-- edit note -->

[GAZL900]

These are ready to ship, I still need payment from

Paulfun
8zlSgtusmc86
Toolmaker

I can not ship until I have been paid :mblah05::mblah05::mblah05:

Thanks, Steve

[markus56]

I'm holding back on getting more of these because I'm trying to let other members have a chance at these limited production goodies. Steve, if you have more made than you have buyers for in the next few days, then I'll take another set before I see you get stuck with them. Mark

[GAZL900]

Don't hold back, I have bought enough material to build 20 sets, So if anyone wants another it will be fine.

Thanks, Steve

[gosupes]

I am down for a set. PayPal on the way if I can remember my password. If not, later on this afternoon.

[GAZL900]

gosupes, Thanks for your quick payment. Yours will ship Tomorrow.

Thanks, Steve

[GAZL900]

Here where it stands:

Paulfun 1 set --------------------------Paid with Postal Money Order, I have Shipping Address -------Shipped 4/17/09

Markus56 1 set ------------------------ I have received PMO, I have Shipping Address-----------SHIPPED 4/14/09

87zlSgtusmc86 1 set ------------------ Paying with Postal Money Order, I Need Shipping Address

RedRocket 2 sets ---------------------- PAID ---------------------------------------------------SHIPPED 4/14/09

Toolmaker129 1 set --------------------Paid with paypal, I have address ,-------------- shipping on 4/20/09

Doublestar444 2 sets -------------------Paid and I have Shipping Address---------------------SHIPPED 4/14/09

CJ-ZL900 1 set -------------------------------Paid with Paypal , I have shipping address--------Shipped 4/15/09

MID.KNIGHT 1set _________________________Paid and I have Shipping Address----------------SHIPPED 4/14/09

gosupes 1 set ------------------------------Paid with Paypal------- SHIPPED 4/16/09

Mick 2 Sets------------------------------------Paying with Paypal, Have shipping address----Shipped 4/21/09


Please send your Paypal Payments Now to: SCahoe1@msn.com (SCahoe1@msn.com)

And if you are sending a Postal Money Order, PM me for my address and also please include your shipping address.



I need to here from the Guys that have not paid, I cannot ship until I have been paid.

20 sets and no more after that, Get them now to help protect that wonderful machine.

Thanks, Steve :headbang:

<!-- / message --><!-- edit note -->

[CJ-ZL900]

Thanks Steve, got my package today! Next step, off for powder coating.

CJ

[Phloid]

pass- got lucky and found some!

[markus56]

Got my guard in yesterday.........Thanks Steve!!

[gosupes]

Finally got around to mounting mine. The left side nut plate was a little difficult to wiggle into place but nothing too major. Painted it black for now. Was thinking about p-coating it but was also kicking around the idea of having it chromed. Did anyone chrome theirs and have pics?

Thanks again Steve and anyone else that was involved.

[GAZL900]

Mick your 2 sets go out today.

Does anyone know 87zlSgtusmc86 he is the only one left who I need a payment and Shipping address.


I have 8 sets left, now is the time to get them while you can, I will not be making anymore after these.

Payment can be made by Paypal to SCahoe1@msn.com or by Postal Money order.

Thanks Guys,

Steve :hello2::headbang::hello2::headbang::hello2:

[zlMark]

Steve,

I made this a sticky to keep it on the first page. Thanks for making these!

[GAZL900]

Thanks Mark, I have 8 sets to go, So it is First come First serve, there will not be any more made so , Please get your sets while you can!!!!!!!!

:hello2::headbang::hello2::headbang::hello2:

[GAZL900]

OK, 7 sets to go,

Thanks NYC-ZL1000-RIDER for your order.

It will ship on Monday.

Thanks, Steve :headbang:

[GAZL900]

OK , only 5 sets to go now, get them while you can. Time grows short.


Thanks Jarney , your two sets will ship tomorrow.

Thanks, Steve:headbang:

[Slippery44]

Here is a pic of the guards back from the chrome shop.

http://www.zl-oa.com/forums/showthread.php?t=10531

[medusa69]

OK im ready to buy in and get a set $92.50 sounds like a good deal..

[GAZL900]

Medusa69, PM me and I will give you the information.
I will need your shipping address and Payment by Paypal to SCahoe1@msn.com
Or by Postal Money Order.
Thanks, Steve

[GAZL900]

Medusa69 and MikeC Thanks for payment, your guards will ship tomorrow.

Only 3 sets left now, get them while you can. Thanks, Steve

[Wstar425]

I'm in for one more, let me know that you have one for me and I will Paypal you!

[GAZL900]

OK, Here is where it stands, Markus56 gets another set, Wstar425 gets another set, I will ship immediatly upon payment received,

and that leaves just ONE MORE SET and then NO MORE!!!!!!

If you want one NOW is the only time.

Thank you to all of you, and enjoy!!!!

Steve

THanks, Steve

[Wstar425]

You should have my Paypal payment.

Thanks, Doug

[markus56]

I will get you a PMO out in the mail Monday! Very Nice piece of work Steve!!!

[medusa69]

i got mine in the mail sat. afternoon i couldn't be happier, top notch workmanship. thanks again...Bill

[paulfun]

I will buy the last one if no one else has taken it yet.

Let me know and Pm me your mail info so I can send payment please.

[GAZL900]

paulfun PM sent.

wstar425 yours is shipping tomorrow.

Thanks, To all.

[zlMark]

paulfun PM sent.

wstar425 yours is shipping tomorrow.

Thanks, To all.Thank you Steve for making another run of these!!!!! :thumbsup:

[markus56]

The payment for my last set will be in the mail in the morning Steve and I too want to thank you for making these for us. I'd have to say the caseguards have been a success!!:headbang:

[Jarney]

Yep, thanks a bunch for your time and effort. When/if you get more free time in the future, put up a shout on here as I'm sure you could sell more of them. Later.

[Wstar425]

I got my second unit today, it looks as good as the first one. It is just going on the shelf until I get another ZL, or God forbid, the original gets damaged. So, if anyone decides they need one in the future, I might consider letting it go, provided no more are ever made. I figure it is as good as money in the stock market anyway! :rotf:

Thanks as well for making them again, and hopefully again as well!

[MikeC]

Just wanted to thank Steve again for the awesome job he did on these bars. What a FIT! Threw in a pic of my cheap pegs. Makes all the difference though. Gonna get some fat ones after lotto hits. (Tomorrow?)Getting ready for a 200 mi ride across FL in the morning. 3 hr window of no rain @ 4 am.

[Foammaker]

I now have three of the ZL900's. I would like one set. I have a used parts bike just recently purchased with about half of a set on it. Not sure of builder. Thanks Sandy (foammaker)

[markus56]

Received my last set in the mail yesterday......Thanks Steve!! Sorry to hear that there won't be anymore made and perhaps you'll reconsider that in the future but thanks for making these for us just the same.:thumbsup:

[GAZL900]

PAULFUN yours are on the way.

I would like to thank all that ordered, Please enjoy and protect these great bikes. I had Three of these ZL's at one time but due to circumstances beyond my control I no longer have even one.

I will build more of these in the future but I will have to have at leat 5 sets to even consider doing this again.

Thanks Again,
Steve :headbang::hello2::headbang::hello2::headbang:

[paulfun]

Yes thanks again for your efforts and good workmanship.
The irst set i got look great and looking forward to putting them on my zl1 very soon.

[Hoss]

Looks like I bought my bike about a month too late... I'd take a set if they were still available. Does any manufacturer make something similar? Looking mainly for something to mount some highway pegs to, any suggestions?

Thanks

[kawboy]

Looking mainly for something to mount some highway pegs to, any suggestions?

Thanks

A Harley? :laughing7:

[Wstar425]

As I have mentioned I have the ZL9 for a while so I could go to the Mpls meet. My son asked me about putting some forward foot pegs on it, I didn't really think it needed them but after the ride over and back in one day I sort of rethought that. So, I got these from CruizerCustomizing, (forgive me!) since I was ordering some other things for the Shadow.

They are Kuryakyan 4507 in case anyone is interested. I don't know if I really like the looks of them or not. They are very solid, but a little bigger than I really wanted. I have not had much luck with the cheapie one size fits all clamp on type, and did not want to screw up the powdercoat on the bars. these are NOT moving on the clamp! They were $116.99 a set.
Not much out there for a 1" bar, other than the ones with the little pyramid pinch washers, which I will not use ever again.


So, what do you think? Good bad ugly indiferent? I'm going out for a ride now. They seem to be a bit high, but this was about as low as I could get them without putting on the bottom of the bar where they would hit almost right away in a corner.

[zlMark]

Look good, the zl900 is a wierd bike to ride to begin with. Good luck

[GAZL900]

Hello Everyone, I have found enough materials to build ONE more set of Case Guards, This will be on a first come first serve. If you are interested please PM me.

Thanks, Steve :headbang:

[zl1000 pilot]

:thumbsup: in need of a set of case guards (engine guards) dose anybody know where to sorce some or am i getting the tig out again :laughing7:

[GAZL900]

I have ONE set ready for shipment, If you are interested PM me.

Thanks, Steve :headbang:

[Bacchus]

I have a used set of black case guards I am willing to sell if new ones run out pm me if interested

[cube_top]

VERY late to this party as I just bought a ZL1000 but I am looking for a set of case guards. I'm trying to eventually be able to mount some highway pegs as I'm hoping to get some trips in.

If you wind up making more or if someone sees this and wants to sell theirs or anything like that, please let me know.

Thanks all!

[GAZL900]

If you guys have enough interest , I could build some of these.

Thanks, Steve:headbang::hello2::headbang:

[cube_top]

If you guys have enough interest , I could build some of these.

Thanks, Steve:headbang::hello2::headbang:

I know you need more than me but you can sign me up for a set.

[cube_top]

I feel sorry for any of you that want these and have to have them shipped. You are missing out on meeting a very nice gentleman. Thanks so much Steve for making these! The construction is beautiful and it's BUILT. I'm on my second coat of primer right now. I'm spraying mine flat black. (I'm not a big shiny/chrome guy)

I can't wait to get it all ready and put it on! :headbang:

Steve is THE MAN! :notworthy:

[Prostreet]

I feel sorry for any of you that want these and have to have them shipped. You are missing out on meeting a very nice gentleman. Thanks so much Steve for making these! The construction is beautiful and it's BUILT. I'm on my second coat of primer right now. I'm spraying mine flat black. (I'm not a big shiny/chrome guy)

I can't wait to get it all ready and put it on! :headbang:

Steve is THE MAN! :notworthy:


Not to dictate, but you should consider the semi-flat thats the same sheen on the engine. Also easier to upkeep.

[cube_top]

Not to dictate, but you should consider the semi-flat thats the same sheen on the engine. Also easier to upkeep.

That's actually what I wound up with. Put 2 coats of primer and then two coats of the semi-flat. Looks pretty good for an amateur. Can't wait to get em on! Maybe Wed. I'll take pics when I get em on. :thumbsup:

[cube_top]

I put my case guards on this weekend. Was pretty easy once I figure out what was what. I didn't know that when you take out the bolts that there is a piece in the back that has the threads so when it dropped to the ground, I was a tad confused. (Didn't take me but a second though.)

Have to drop the radiator to get those little buggers back into place. Also plan on buying longer bolts. I went to Home Depot and got #8 bolts with 1.25 pitch thread and 60mm. Worked like a charm. It went together with minimal fuss after that.

I also used a floor jack to raise the engine a little since it will "slump" slightly in the frame when you take the bolts out.

All in all I think it took me 1.5 hours including the trip to the store which is pretty good for me because I'm a MECHANICAL IDIOT. (Means it will probably take anyone else about 10 minutes to do. LOL)

Love em! They're BEEFY! A couple of friends of mine are making some custom highway pegs for bikes and I'm getting one of the first sets for free. Perfect timing I say!

http://images54.fotki.com/v461/photos/3/86903/8712190/caseguard1-vi.jpg

http://images56.fotki.com/v1600/photos/3/86903/8712190/caseguard2-vi.jpg

Thanks again Steve! :notworthy:

[furchin]

Steve, too much work doing it that way. Did you check out the tech doc posted with the instructions for case savers?

[cube_top]

If you're talking to me, no, I didn't know there was a tech doc. I just thought it didn't look too bad with only 4 bolts so I went at it. :rotf:

Instructions.....BAH! Who needs em! ;)

P.S. Everyone should be not dumb like me and read the tech doc so they know about the floating nut thingy that will fall off if you take both bolts off at the same time which will then require you to drop the radiator to get those little buggers back on! Don't be a dummy like me!

[Wissler]

Thanks for the heads up!
I did a teardown in the last few months,and was going to put my radiator and case guards on tonight, but after reading this, I'll have to read the tech doc!

****!! I love this site!!

[jdubay]

If any more are made I''ll take a set just PM me Thanks! Jay

[GAZL900]

Hello, I will be fabricating 3 sets tomorrow, I have one set sold and a second one tenative, If you are wanting a set please PM me ASAP.

Thanks, Steve :headbang:

[markus56]

Don't know who ordered the other two sets but I did get mine yesterday Steve......thanks for letting me in on this run too. To tell you the truth, I haven't even opened the box yet and will just store them as is until I need them since the other three sets I've gotten in the past were fine and I'm sure these are the same. This gives me two of Steve's sets and one NOS OEM set in reserve now......guess I should buy some more ZL's! :thumbsup:

[desertrefugee]

I know I'm pretty late to the party here, but if there's another run planned for these things, I'd love to pick up a pair for a 900!

Thanks!

[GAZL900]

I am thinking about it, I will let you know.
If I knew there were more interested , that would help.
Thanks, Steve :hello2:

[GAZL900]

I have ONE set ready for shippment, First come first serve
Price is $95 including shipping in the Lower 48.

:headbang::headbang::headbang:

[FalconZL900]

are there anymore case guards? thanks, mike

[badbrad]

I would like a set also when you get it started again.

[GAZL900]

I will post here when I build more, and I will PM anyone who says they would like a set.

Thanks, Steve :headbang:

[Bozang1]

I'd like a set but I am in no rush. Just let me know ahead of time so I can scoop up some $ from somewhere...

[86merc5.0]

TO, GAZL900, I just bought a zl1000 ( bought one brand new & sold it ten years later, missed it real bad ) please add me to your list of people wanting engine case guards. Let me know when your ready for payment. Thanks

[ponytail mike]

You guys really act fast,count me in I need a set for the new daily driver900 I am finishing up.

[GAZL900]

All of you guys that want a set , I have 6 sets ready for shippment. PM me

Thanks, Steve

[GAZL900]

6 are ready for shippment, I will not be making another run until probably next year, SO get in while you can.

Thanks, Steve

[GAZL900]

Looks like this will be the LAST RUN!!!!! I am not getting the response I thought I would be getting for these, I don't want to go to SleezeBay to sell these, So if you are in the market this is the time.

$103.50 To Paypal Account SCahoe1@msn.com this will include shipping to the lower 48 in the US. Ready for immediate shippment.

Thanks, Steve

[paulfun]

Its vacation time for many ! So its sort of like being broke just after christmass. Be patient and surely people will be buying soon!

[GAZL900]

I know where your comming from, I am selling these for a vacation I will be taking.

Thanks, Steve

[Jarney]

Have you tried pm'ing some of the members that showed an interest in the guards in this thread? As Paulfun stated, it's vacation time and some people already are dealing with the kids going back to school and some members just don't check in all that often on the site. If you do a search on this site for case guards, there are a lot of threads (some fairly old of course) that come up and some may not be related to this one but you will see posts from members saying they want a set - they just posted in the wrong thread. Hope this is not the last run of these for you - I'm sure there will be more people in the future looking for them - you do good work and it's great when a member provides a product/service for us here. Thanks. Later.

[markus56]

+1 on all that!
Have you tried pm'ing some of the members that showed an interest in the guards in this thread? As Paulfun stated, it's vacation time and some people already are dealing with the kids going back to school and some members just don't check in all that often on the site. If you do a search on this site for case guards, there are a lot of threads (some fairly old of course) that come up and some may not be related to this one but you will see posts from members saying they want a set - they just posted in the wrong thread. Hope this is not the last run of these for you - I'm sure there will be more people in the future looking for them - you do good work and it's great when a member provides a product/service for us here. Thanks. Later.

[FalconZL900]

sent payment for a set of Case Guards. Thanks, Mike

[nick77]

P.M. Sent

[nick77]

Money sent by paypal.

[helgi33]

Do you still have any sets remaining. I need one and am ready to send paypal right away.
The shipping would be to NY 11434

[GAZL900]

I have two ready for shippment, PM me if you are ready

Thanks, Steve

[Scottmollica]

I would love some of these guards. but I live in Australia. Would you be able to ship to me?