PDA

View Full Version : Production numbers



Kris900zl
09-03-2006, 03:15 PM
I was just wondering how you could tell what number your bike is from that sticker? I guess its located on the cerial number somewhere.

Kris900zl :twisted: :)

zlMark
09-03-2006, 04:15 PM
mine is 503,100 and the 10th digit "F" is for 1985

Kris900zl
09-04-2006, 12:23 AM
Well if that is the case mine says FA000321 so I guess that is a low number.

kris900zl :twisted: :)

zlMark
09-04-2006, 08:00 AM
i read somewhere that they were built here in the usa. wonder where they were built at. The A in yours tells me ours are different

Kris900zl
09-04-2006, 10:01 AM
I wonder what the difference is? could it be emissions because mine dosent have that on her. Maybe it is a tag for export,I dont know but maybe :idea: . Do you think mine is a low number.

kris900zl :twisted: :)

Jarney
09-04-2006, 10:36 AM
Hey Mark,
I remember something about nebraska being where the build plant was or is. Not real sure though.

connorsracing
09-04-2006, 02:01 PM
My bike's last few numbers are 652...

my parts bike is 456...

my '86 600 is 326...

and yes...they were built in Lincoln Nebraska

http://www.mcreports.com/Pages/Indivbikes/Kawasaki/Eliminator-900.html

http://www.kawasaki.com/kawasaki_aux/our_company/kmm.asp

Gary

LUMI
10-26-2006, 07:32 AM
On my A1 (3/85) FA001748 and A2 (7/85) CB505085

Does anyone know the exact numbers of how many ZL900 where made?

wuputt
10-26-2006, 11:18 AM
I have tried very unsuccessfully to get the numbers! I tried numerous times from Kawasaki, no luck. I tried the motorcycle commission, they have the numbers but will not share them!
The "A" depicts "California" model, slight emmissions difference.

K-Ray
09-21-2007, 04:12 AM
well it looks as if no one found out any more info on the ZL line by the vin. Heres the vin.# off my bike
JKAZL2A15FA001028

K-Ray
09-21-2007, 04:58 AM
I have the service manual suppllement for the ZL900 and ZL1000 and shows two models A1 and A2 and for cal. models you will find a cal. on the carbs and a canister behind the air box for emissioins and the mufflers will have ca on them.
Now the ZL1000-A1 is US and Canadian

Wold
09-21-2007, 07:22 AM
if its rights
my ZL900 ( JKAZL2A12FB504056 )
is US manufactured

http://www.cyclechaos.com/wiki/Kawasaki_ZL900A

but my ZL was bought in Japan %)

K-Ray
09-21-2007, 12:17 PM
from what I've read all the ZL come out of the USA
I have a CYCLE WORLD and CYCLE mag. from 1985 they call the ZL Kawawaski's daring new production drag bike. it's based off the old Z1 900 from the 70's

wuputt
09-21-2007, 01:34 PM
K-ray, are those the same articles that are in the "articles and advertisements" section here? If not, would like to see if you can scan and submit to Mark so we can read em!

If you look on the back of the Service manual it tells which numbers in the VIN indicate production sequence!

zl900 On the '85 model, FA indicates Cal. model. On the '86 is't GA.
FB and GB indicate 49 states model.

ZL1000 it is HA and HB.

Here is an interesting theory, I have an original '85 service supplement for the zl9 and I have a new supplement for the zl9/zl1k. Looking at the new one, the '86 zl9 vins reflect production numbers, 2301 for Cal. and 4701 for 49 states, I wonder if they produced that qty.???????

K-Ray
09-21-2007, 02:21 PM
I will scan and submit them to Mark and from what I see all the ZL900 are FA and I'm sure mine is not a cal. bike. Now I got my Service manual from Kawi. right after I got the bike and when I was getting parts they said it was a 49 state bike.

acp
09-21-2007, 02:36 PM
They're not all FA K-Ray

JKAZL2A12FB503005, as shown in my sig.

Only references I've ever seen show FA as being the Cali model.