A
ARCHIVE_mrdata
Guest
ZL600 Carbs
Ever since I took off the carbs to clean them and install carb kits (standard replacement parts, nuthin' fancy, the bike is completely standard), I have been unable to make the bike idle. It starts on choke, but when its warm, it wont idle. I can adjust the throttle stop so it will idle briefly, but the revs will start to climb and i'll be at 4000 and climbing. Adjusting the throttle stop out just makes it stall when I let off the gas. I've stripped the carbs multiple times, cleaned all components, checked the float height, blown out all the internal passages with compressed air, cleaned the air filter and tried every idle jet setting from 1/2 to 3 1/2. Any suggestions?
Thanks
MDH
Ever since I took off the carbs to clean them and install carb kits (standard replacement parts, nuthin' fancy, the bike is completely standard), I have been unable to make the bike idle. It starts on choke, but when its warm, it wont idle. I can adjust the throttle stop so it will idle briefly, but the revs will start to climb and i'll be at 4000 and climbing. Adjusting the throttle stop out just makes it stall when I let off the gas. I've stripped the carbs multiple times, cleaned all components, checked the float height, blown out all the internal passages with compressed air, cleaned the air filter and tried every idle jet setting from 1/2 to 3 1/2. Any suggestions?
Thanks
MDH