Discontinued Kawasaki Eliminator ZL parts

Jarney

Strip Warrior
Staff member
Administrator
Super Moderator
Supporting Member
Joined
Sep 1, 2006
Messages
4,170
Reaction score
17
Location
USA IN, East Central
Ok, in the links below are the list of part numbers that are considered discontinued or no longer available for the 1987 Kawasaki Eliminator ZL1000 and 1985 Kawasaki Eliminator ZL900. This information was taken straight from Kawasaki's website. Most of this stuff is just nuts and bolts and washers, etc. There are some parts listed that have "Active" part numbers due to parts being "Superceded" - which I think is just beause Kawasaki does not always have their website up to date. There are also some part numbers that have other notes such as "See Dealers Substitute Parts List", "Interchangeable With Part Number XXXX" and "Limited Quantity". This isn't really anything to read or look at - unless you are bored out of your skull and have a lot of time to kill, but will hopefully come in handy or be of some use to someone in the future.

These lists will allow us to search on this site for these part numbers without going through everything on Kawasaki's website or relying on other parts sites and their fiches - which a lot of times will list parts as Active, when really they are not - again, websites are not always up to date and it can be a pain to go through all that if you have a crappy internet connection and it really stinks when you order the so called "Active" part, then wait and wait only to get a message from the parts store that it has been discontinued. So if you have a part number and you want to see if it's actually available, type or copy and paste it in the search feature on this site and if it shows up under the Parts area, then it is discontinued - unless there is some other note along with the part number. Another option is to go to the Parts area, open the thread of the bike you are looking at parts for, then in Internet Explorer, you can click on "Edit" at the top of the page, then click on "Find on This Page" and type in or copy and paste the part number and see if it shows up (it will highlight it if it is on that page and show you how many "Matches" on that page). In the future if you find a part number that has become discontinued, obsolete, interchangeable, no longer available, or just something that I missed, contact an administrator or moderator or submit a post in this thread and we can check into it and edit these lists as needed. I or someone will probably work on other lists in the future (these are mostly winter projects), other bikes or lists for the major parts only as opposed to a "full" list that includes every nut and bolt, etc, like we have here. Hope this saves everyone some time and is of use to us. Later.



Discontinued parts for the 1987 Kawasaki Eliminator ZL1000:

http://www.zl-oa.com/community/thre...Numbers-1987-Kawasaki-Eliminator-ZL1000.18723



Discontinued parts for the 1985 Kawasaki Eliminator ZL900:

http://www.zl-oa.com/community/thre...-Numbers-1985-Kawasaki-Eliminator-ZL900.18724
 
Last edited by a moderator:
really good idea... I have a zl-6 but it's still a pain sifting through part numbers... well done
 
Yeah thank you my brother. I will be going through the list and ordering accordingly.
 
thank you Jarney. I used that for ordering a part that they had changed the number on.
Don't know why they did that because its exactly the same part as far as I can see.
Maybe a different supplier.
 
:hello: I ordered a new front brake light switch for my ZL 10. Part # 27010-0025. It is not listed for the ZLs but it will fit the ZL 6, 7.5, 9 & 10. IMG_7658.JPG
 
Hey guys,

I have an 87 ZL 600 that has sat for a while. It continually fouled the the #4 plug and I couldn't figure out why. With some time on my hands recently, I pulled the carbs and found the problem...the previous owner lost a needle jet when cleaning the carbs. 16017-1314 is no longer available. Is there any aftermarket or interchangeable part? From my research...I fear salvage or ebay is it... Has anyone ever looked into having something fabricated?

Any help would be greatly appreciated!
 
message wickedzl900 on the site here, he may have some advice.
 
C-11.GIF
 
He's looking for 16017/A in the diagram
 
The only way to get this part replaced is IMO he needs someone with a mechanic lathe who can make a copy of this part from one of the other carbs.
 
:hello: If all else fails buy a set of carbs from a non CA bike because they don't use that part in the carbs. The best thing to do is do away with part # 16017-1314 and change the main jets to the #88 jet part # 92063-1024. or the #95 jet part # 92063-1004. One of those 2 are the stock jets for the non CA ZL 600. https://www.partzilla.com/catalog/k...86/zl600-eliminator-zl600-a1/carburetor-parts . Go here for jetting info for the ZL 600. https://www.zl-oa.com/community/threads/new-86-zl600-tuning.22234/.
 
Last edited:
:hello:What makes you think this part is not needed? :thumbsdown: It's the jet for the needle and there are two different ones: 16017 & 16017A. 16017 = #16017-1292 for CAN-models only, 16017A = #16017-1314 for all others (...and obviously no longer available). #...-1292 is used together with the CAN-needle #16009-1310 type N27Z, #...-1314 belongs to #16009-1309 type N27X so you cannot (should not) mix the parts - has nothing to do with main jets...:)
 
Thanks for all the ideas.

I had an epiphany and researched the specs on the carbs from the similar era 600 Ninja. A few different parts, but the ones i needed were the same. There are a number more Ninja carbs for resale than ZL carbs. I snagged a set that was missing a few other parts I didn't need, but everything I did and got them for just over $40 with tax. The only price I found (out of stock of course) was $40 and some change for just one of the 16017-1314. Crazy!

Thanks again and hopefully I'll be posting again soon with an update about it running again!
 
You know they are not the same part, right?
 
Back
Top