New Member

  • Thread starter Thread starter ARCHIVE_terry
  • Start date Start date
A

ARCHIVE_terry

Guest
swingarm cap

Has anyone ever had the swingarm cap come out? I was riding my 600 today and the chrome cap popped out and engine oil came gushing out. Its the cap covering the swingarm pivot. I siliconed it and put it back, but it seems odd that it would come out, for no reason.
 
Swingarm cap

Hello Terry,
I went riding with Rocky and a coworker one day and we went down some of Indiana's "finest" roads - "finest" = horrible, pothole covered, bumpy, rough, etc. After the ride, Rocky informed me he had lost one of his caps and a few other things too I think. I think they have a tendency to slowly work their way off and should be checked occasionally - or you can put just a dab of silicone on the inside of them when you put them on to help hold them in place.
As for the oil - are you sure it was engine oil and not gear oil? Either way, it looks like you have a bad seal somewhere, at one end of the driveshaft or the other - or both, depending on what kind of oil it was. I would be careful with that, make sure you check your fluid levels, if you have a leak back there, it could get on your rear tire while riding. This could get real ugly and dangerous while riding down the road. Even if it is not leaking out onto the ground, if it's engine oil, then your swingarm could be holding a large portion of your engine oil meaning your engine is not getting it's proper amount of oil for lubrication - the same goes for the rear drive unit - all or some of the fluid could be in the swingarm, and not where it's supposed to be doing it's job - lubricating gears. Gears and engine components without good lubrication can get ruined real fast that way. Hope that helps a little, later.
 
Hey Terry, Im with Jarney on the Bad Seal, The cap is just to Hide the Bolts.I used a Small piece of Velcro on the Caps, Works Great :D
 
Caps

I have been missing one since I got my bike and have not experienced any problems. I have heard of people storing air for an air shifter in their swingarms but never heard of anything like oil or fuel or even coolant.
Miniking :twisted:
 
swingarm cap

My son and I Pulled apart the driveshaft this morning to see what was up. Everything looked good until I checked the seal by the front bevel gears. It was in pieces and the bearing next to it was loose on the shaft. The entire length of the shaft was bathed in engine oil, also. I went to my Kawasaki dealer and they had the seal in stock!! Didnt have the bearing, so I went to a bearing supply company and bought a higher quality Federal-Mogul roller bearing. Put it back together with Loctite red and Mobil one in the diff. Amazing how little lube is in the rear end. Took out for a spin. Brrr. Popped off the cap and checked for oil. Its fixed. Sure was lucky that cap came off or it could have been much worse.
 
Registered a couple weeks ago. Just got my zl1000 on the 18th. Third one I have owned, first one was in the early 90's I traded a jet boat for it, had no idea what it was, hell I thought it was a cruzer!!!Then I figured I'd see what it would do so I slammed the throttle and WHAT THE $@!$!!! I ended up trading it for a car after a couple of months (I was in desperate need for a car)I never forgot that bike and swore if I ever got another one it would be a zl1000 so I finnally got one about a year ago(a parts bike really that I was going to "fix up", bit off more than I could chew!!!) So I got me a nice one 10k miles, runs perfect,no mods(yet!)don't leak anything,and no cam noise. I LOVE IT!!Pics to come. As soon as I borrow a digital camera so hello everyone and look forward talkig to ya!
 
Welcome to zl-oa! Glad you found a nice one. Do you have the parts bike still? I'm looking for exhaust, complete or parts.
 
Back
Top